51OPERATING THE TRACTOR
AUTO MODE
BOutline
The Auto-Mode is an automatic speed change function that is designed to shift up and down the travel speed in response
to the load-dependent engine rpm fluctuations, attachment maneuvering, acceleration pedal movement and other factors.
The Auto-Mode comes in two ways, "Travel mode" and "Field mode", according to the applications.
C Travel mode
In trailing operation, the automatic shift-up/down is carried out within a predetermined range (factory-set for 2 shifts),
responding to the acceleration pedal movement and rpm changes from load. This helps you avoid troublesome gear
shifting.
A The tractor has been factory-set for the automatic range (2 shifts) discussed above. This gearshift range can be
modified to meet your applications. (For details, refer to "Changing the Auto-Mode settings" in this section.)
A The Auto-Mode does not function if the clutch is disengaged or halfway or in turning over the Bi-speed turning angle
and if shuttle lever is in reverse position.
A The Auto-Mode functions when the engine rpm is above the middle speed.
To Next Page
Loading...
Need help?
General
