EasyManua.ls Logo

Kubota zd 331 - GENERAL TORQUE SPECIFICATION

Kubota zd 331
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC SERVICE62
A Operate only at low RPM's immediately after changing
the transmission fluid and filter cartridge.
Keep the engine at medium speed for a few minutes to
insure proper lubrication of all parts so there is no
damage to transmission.
BReplacing Hydraulic Oil Filter Cartridge
To avoid personal injury:
A Be sure to stop the engine and remove the key
before changing the oil filter cartridge.
A Allow transmission case to cool down
sufficiently; oil can be hot and may cause
burns.
1. The oil filter cartridge must be changed every 400
service hours.
(1) Drain plug
(2) Transmission oil filter
(1) Drain plug
(2) Rear axle gear case LH
(1) Oil level dipstick
(2) Oil plug and breather cup
(A) Oil level is acceptable
within this range.
(1) Oil filter cartridge

Table of Contents

Related product manuals