EasyManuals Logo

Kubota zd 331 User Manual

Kubota zd 331
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
80 TROUBLESHOOTING
BATTERY TROUBLESHOOTING
If you have any questions, contact your local KUBOTA Dealer.
MACHINE TROUBLESHOOTING
If you have any questions, contact your local KUBOTA Dealer.
Trouble Cause Remedy Preventive measure
Starter does not function.
A Battery overused until
lights are dim.
A Charge battery
sufficiently.
A Charge the battery properly.
A Battery has not been
recharged.
A Poor terminal
connection.
A Clean the terminal
and tighten securely.
A Keep the terminal clean and
tight.
Apply grease and treat with
anti-corrosives.
A Battery life expired. A Renew battery.
From beginning starter
does not function, and
lights soon become dim.
A Insufficient charging. A Charge battery
sufficiently.
A Battery must be serviced
properly before initial use.
When viewed from top,
the top of plates look
whitish.
A Battery was used with
an insufficient amount
of electrolyte.
A Add distilled water
and charge the
battery.
A Regularly check the
electrolyte level.
A Battery was used too
much without
recharging.
A Charge battery
sufficiently.
A Charge the battery properly.
Recharging is impossible.
A Battery life expired. A Replace battery.
Terminals are severely
corroded and heat up.
A Poor terminal
connection.
A Clean the terminal
and tighten securely.
A Keep the terminal clean and
tight.
Apply grease and treat with
anti-corrosives.
Battery electrolyte level
drops rapidly.
A There is a crack or pin
holes in the electrolytic
cells.
A Replace battery.
A Charging system
trouble.
A Contact your local
KUBOTA Dealer.
Trouble Cause Remedy
Machine operation is not
smooth.
A Hydrostatic transmission fluid is
insufficient.
A Replenish oil.
A Filter is clogged. A Replace the filter.
Machine dose not move while
engine is running.
A Parking brake is on. A Release the parking brake.
A Transmission fluid level is
insufficient.
A Replenish oil.
Machine moves when motion
control levers are in the
"NEUTRAL LOCK" position.
(Engine is operated.)
A Hydrostatic lever linkage is not
correctly adjusted.
A Ask your dealer for hydrostatic lever
linkage adjustment or pressure
adjustment.
A Control linkage pivots are sticking. A Full up and lubricate linkage.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota zd 331 and is the answer not in the manual?

Kubota zd 331 Specifications

General IconGeneral
StyleZero Turn
ColorOrange
Cutting Width72 in
Cutting Height1-5 in
Cutting Method-
Number of Blades-
Drive System4×2 2WD
Case Size: U1R12V 28Ah
Noise Level-
FeaturesHigh Back Seat
Accessories-
Motor / Engine ModelKubota D1305
Power Output31.4 PS (23.1 kW; 31.0 HP)
Cylinders3
Generator-
Power / Fuel TypeDiesel
Fuel Tank Volume49.0 liters (12.9 US gal.; 10.8 Imp. gal)
SAE 5W30 (below 32°F/0°C)-
w/o Filter: 44 oz. (15 Imp. qt.)
Weight and Dimensions IconWeight and Dimensions
Depth2335 mm
Height1915 mm
Width2223 mm
Net Weight803 kg

Related product manuals