Putting into service
Mower conditioner
FC243
21
$PUTTING INTO SERVICE
1. Description of control elements
The machine is fitted with a release cord operated from
the tractor cab.
The machine is supplied with an 18 mm box wrench (1)
to carry out certain adjustment and maintenance tasks.
2. Coupling and uncoupling
The machine adapts to tractors fitted with a 3 point
linkage category 2.
Description of coupling elements
- A PTO shaft 1 3/8’’ - 6 splines.
- A check chain.
- A release cord.
- Two hydraulic hoses which control the machine
transport/work position setting.
- An 7-pin electric plug for the electrical signalling
equipment.
To Next Page
Loading...
