Mower conditioner
48
FC243
Maintenance and storage
$MAINTENANCE AND STORAGE
1. Frequency chart
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
After the
first 10
hours of
use
Every 30
hours
Every 50
hours
Every 200
hours or at
the end of
the season
Oil change:
- The cutterbar.
33
- The side angle gearbox.
33
- The central gearbox.
33
Oil:
- The moving parts and pivot points.
3
Grease:
- The mowing unit compensation
cylinder ball joint.
3
- the cutterbar connecting frame
pivot pin.
To Next Page
Loading...
