Maintenance and storage
Mower conditioner
FC243
49
2. Cleaning the machine
Regularly clean the build up between the conditioning
hood and the carrying frame tube:
- Remove the split pins on both tube ends.
- Remove the rear part of the protection cover.
- Clean and reassemble the unit.
3. Lubrication
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations (knife replacement, lubrication,
etc).
Clean grease nipples before greasing.
Lubricate with SHELL multi-purpose grease
grade NLGI 2.
To Next Page
Loading...
