Mower conditioner
50
FC243
Maintenance and storage
PTO shaft
Primary PTO shaft
- Every 8 hours:
• universal joints (1).
• transmission tube (2).
• guide rings (3).
Secondary PTO shaft
Every 8 hours:
- universal joints (1).
- transmission tube (2).
• Slide the black collar.
• Turn the 2 PTO shaft guard tubes.
• If necessary, rotate a disc to access the grease
zerk.
• Slide the black collar back in place when lubrication
has been completed.
- guide rings (3).
Place the machine in working position.
Stop the tractor engine and remove ignition key.
To Next Page
Loading...
