Putting into service
Mower conditioner
FC243
33
Uncoupling the machine
- Place the machine in transport position.
- Lower the tractor three-point linkage to rest the
machine on the ground.
- The lock (1) must be in contact with limiter (2).
- Uncouple and place PTO shaft in support (1).
- Disconnect and store hydraulic hoses on holder (2).
- Disconnect and store 7-pin plug in its holder (3).
- Detach the top link from the machine end.
- Uncouple the lower links.
- Lower the tractor three-point linkage.
The machine is uncoupled.
For tractors not fitted with a hydraulic
position control function, unhook and attach
check chain to its support.
To Next Page
Loading...
