KUHN FC2860TLD - Page 77

11. - Maintenance and storage
FC2860TLD-3160TLD-3560TLD
77
KN281CGB_L
Mower conditioner
 Side gearbox
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
FC2860TLD FC3160TLD FC3560TLD
Type of oil Synthetic oïl for mechanical drives
When changing the oil, it is recommended to use either an identical mineral
oil or a synthetic oil of type PAO (Poly-Alpha-Olefine) with viscosity grade
SAE 75W90.
Oil volume 2.7 L (0.71 US gal)
Viscosity SAE 75W90
Specification API-GL5 (extreme pressure)
- Remove filler plug (1) and its washer.
- Place a container of sufficient capacity under drain
plug.
- Remove drain plug (2) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (2) and its
washer. (Replace if necessary).
- Pour the correct oil quantity and quality through the
opening of the filler plug (1).
1
2