KUHN GMD24 - 9.4 High cone disc kit; 9.5 Inner swath disc; 9.6 Inner swath shield

GMD24-GMD28 / HD
56
9. - Optional equipment
KN226BGB_A
Disc mower
9.4 High cone disc kit
Only for GMD28:
The high cone disc enables reducing the swath
width.
The swath width equals 1.80 m (5’10’’) depending
on the forage density.
- Replace flat disc with the high cone disc.
9.5 Inner swath disc
Only for GMD28:
Use this kit in combination with the high cone
disc kit.
The swath width equals 1.50 m (4’11’’) depending
on the forage density.
9.6 Inner swath shield
The inner swath shield allows reducing the swath
width to approximately 1.20 m (3’11’’) depending on
the forage density.
Only for GMD24 - GMD24HD:
The inner swath shield must always be used
in combination with the inner swath disk.
Only for GMD28 - GMD28HD:
The inner swath shield must be used in
combination with the inner swath disk and
with the high cone disk.