KUHN GMD44 - Gearbox Replacement Procedures; Gearbox Maintenance Procedures

GMD44 _760001 _xxxxxx
Gearbox
Required equipment
Preliminary operations
Changing angle gearbox oil .
Operating procedure
Upstream operations
Step 1.
Remove the gearbox
Remove cutterbar from the chassis.
Remove 4 bolts (1).
Remove brackets (2).
Remove side skids (3).
1
Page 55/95Printing date : 06-02-2014 GMD44_760001_xxxxxx
©Copyright KUHN S.A.