Always keep to the legal speed limit for driving a tractor
-
machine assembly on public roads.
Precautions when coupling
Before attaching the machine, make sure that it
cannot accidentally start moving (chock the
wheels) and that the parking stand is in the right
position.
The machine must only be attached to the hitch
points provided for this purpose.
Never stand between the tractor and the
machine when operating the three point
linkage.
Do not stand between the tractor and the machine without ensuring that the parking brake is applied.
Hydraulic circuit
Caution! The hydraulic circuit is under high
pressure. Maximum pressure at work:
200
bar.
Before connecting hoses to the tractor
hydraulics, ensure that tractor and machine
circuits are not under pressure. Before
disconnecting a hose, depressurize the
hydraulic circuit.
To avoid making incorrect connections, mark
hydraulic couplers and corresponding hoses
with colors. WARNING! Functions could be
reversed (for example: lift/lower) and cause
To Next Page
Loading...
