EasyManua.ls Logo

KUHN GMD44 - PTO Shaft Safety Precautions

KUHN GMD44
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
accidents.
Regularly check the hydraulic hoses. In case of normal wear, replace the hydraulic hoses every
5
years.
Damaged or worn hoses must immediately be replaced. When replacing the hydraulic hoses, only use
hoses with the specification recommended by the manufacturer of the machine.
To locate a leak, use appropriate means. Protect body and hands from liquid under pressure.
Any liquid under pressure (particularly oil from hydraulics) can penetrate the skin and cause severe injury.
If injured, see a doctor immediately, there could be danger of infection.
Before any adjustments, maintenance or repairs are carried out, lower the machine to the ground,
depressurize the hydraulics, turn off the engine, remove ignition key and wait until all moving parts have
come to a complete stop.
PTO shaft
Use only PTO shafts supplied with the machine or recommended by the machine manufacturer.
The protective shield of the tractor PTO stub, the PTO shaft guards and the protective shield of the
machine input shaft must always be in place and in good condition.
Make sure that the PTO shaft guards are secured with the safety chains provided.
Any worn or damaged guards must be
replaced immediately. A worn guard or an
unprotected PTO shaft can cause a serious or
even a lethal accident.
Do not wear loose clothing that could be caught in the rotating PTO shaft.
Before attaching or removing a PTO shaft, or before doing any work on the machine, disengage the PTO
drive, turn off the engine, remove ignition key and wait for all moving parts have come to a complete stop.
Page 9/95Printing date : 06-02-2014 GMD44_760001_xxxxxx
©Copyright KUHN S.A.

Related product manuals