Splitting
29
Selecting a Voice
To create a split, press the [Split] button to
enter Split Mode.
The [Split] button is located on the left side
of the front panel.
When the [Split] button is pressed, the current voice becomes the primary (right hand) split
voice.
Select the voice you want to use as your primary voice. Then press the [Split] button to enter
Split Mode. The [Split] button LED lights and PRG:183 scrolls across the display. This is the
secondary (left hand) voice for the split. (The default voice ID number is 183, E Bass, and the
default split key is F#3.)
The key range of the split voice is as follows:
A0 through F#3 for the secondary voice
G3 through C8 for the primary voice
Using the parameters available in Split Mode, you can modify the secondary voice.
The first parameter, Split (secondary) Voice, is active when you press the [Split] button. A
description of the parameters follows.
To exit Split Mode, press the [Split] button.
Split Mode Parameters
There are four parameters available in Split Mode. Changing the value of a parameter
determines the performance of the split voice.
In Split Mode, use the [Select] and buttons to step through the parameters. To change
the value of parameter, press the [Prev] or [Next] button.
NOTE: Changes to the Split Voice, Split Key, Split Volume,
and Split Transposition are remembered for the next time you
want to use a split voice; but are not stored in memory. They
return to their default settings when you turn off the MPS20.
Be sure to save your changes as one of the Favorites!
To Next Page
Loading...