Recording
Chapter 10
38
Recording
Recording a Song
The MPS20 has a two track recorder. You can record two voice tracks and a rhythm pattern
accompaniment. Favorites can be used to give you even more versatility while recording. For
example, you can have a Favorite split voice such as Piano and Bass recorded in Track 1 and a
layered favorite in Track 2.
Preparing to Record
If you want to have a rhythm pattern play while recording, select the [Function] button to enter
Function Mode. Press the [Select] or buttons to step through the list of parameters. The
default setting for the REC RHYTHM parameter is OFF, press the [Prev] or [Next] button to
change the value to ON.
You can leave this parameter set to ON. There is a "no rhythm" pattern available, rhythm ID
number 351. Select this rhythm pattern and no rhythm will play.
NOTE: The default setting for the metronome is also OFF. Follow
the instructions described above to enter Function Mode, but
select the METRO:off parameter and change its setting to
metro:rEC. This will allow the metronome to play during
recording.
Recording Track 1
Select the voice you want to use for Track 1. To record a song with a rhythm pattern, press the
[Rhythm] button and select a pattern for your recording.
Press the [Record] button. Its LED lights and the display scrolls RECORD READY. The [Track 1]
button's LED should also be lit.
To begin recording, press the [Play/Stop] button and start playing.
NOTE: If you are using the metronome, it will count off one
measure before recording begins.
To Next Page
Loading...