Kurzweil PC361 - Page 45

Quick Access Mode
The QA Editor
4-3
Selecting A Setup For A Quick Access Entry
Ifyouwanttostoreasetupinthecurrententryinsteadofaprogram,presstheTypesoft
button—whenyoudothis,noticethattheTypefieldchangefromProgramtoSetup(alsonotice
thatthechannelindicatordisappears,sincesetupscantransmitoverseveralchannels).Thelist
of
objectschangesfromtheprogramlisttothesetuplist.Justaswithprograms, thecursor
highlightsthesetup’sIDandname.UsetheAlphaWheelor‐/+buttonstoscrollthroughthe
setups.YoucanalsousethealphanumericpadfollowedbytheEnterbuttontochooseaSetup
byID#.
KeepinmindthatyoucanhavebothsetupsandprogramsinthesameQAbank.
Naming And Saving A Quick Access Bank
Whenyou’vefilledeachentrywiththeobjectyouwant,presstheNamesoftbuttonifyouwant
torenamethebank,orpresstheSavesoftbuttontobeginthesaveprocedure.
Or,presstheExit
buttontoexittheQAeditor,andthe“SaveChanges?”dialogcomesup.