KVH Industries TracVision 4 User Manual

3. Apply power to the TracVision 4 system and allow
the system to complete full initialization. Data
should be scrolling on the PC display to identify
any system problems detected. If no data is seen,
recheck your connections and the terminal
software setup.
4. After completing the diagnostic, shut down the
system.
4.5 Maintenance Port Parser
Commands
TracVision 4 system parser commands are detailed in
Appendix G.
4-5
Troubleshooting
54-0150 Rev. D

KVH Industries TracVision 4 Specifications

General

Brand	KVH Industries
Model	TracVision 4
Category	Satellite TV System
Language	English