Note：1、When installing DC reactor, be sure to remove the short connector between terminals
and ;KVM6020 and below structure without terminal.
2、No PR terminal for KVM6060 and above.
3、The internal power supply (24V port) or external power supply (PLC port) can be selected
for S1～S8 port bias voltage, and the factory value 24V port and PLC port are short circuited;
4、Port S8 is restricted by function parameter P5-00, which can be used as high-speed pulse
input channel with maximum input frequency of 50KHz;
5、Port Y4 is restricted by function parameter P5-32, which can be used as high-speed pulse
input channel with maximum input frequency of 50KHz.
+
1
+
2
- 51 -
- 50 -
KVM6000
Standard wiring diagram
11.Warranty Service
Warranty Card
User Name
User
Address
User
Contact
Tel
Specification
Number
Distributor
Contacts
Date of
delivery
KVM6000
Warranty Service
+
2
To Next Page
Loading...