KYMCO Mongoose 50-4T User Manual

16. STARTING SYSTEM
16-8
INSTALLATION
Install each washer to the top and bottom of
the reduction gear.
Apply grease to the reduction gear shaft
forcing part.
Then, install in the reverse order of
removal.
INSPECTION
Inspect the starter one-way clutch drive gear
teeth for burrs/chips/roughness/wear.
Inspect the starter one-way clutch drive gear
contacting surfaces for pitting/wear/damage.
Push the weight roller to arrow direction for
unsmooth operation. → Replace starter
clutch assembly.
Starter Gear Shaf
t
Reduction Gea
r
Washers
Reduction Gear Case
Contacting Surfaces
Teeth

KYMCO Mongoose 50-4T Specifications

General

Brand	KYMCO
Model	Mongoose 50-4T
Category	Offroad Vehicle
Language	English