Why is my Kyocera ECOSYS FS-2100D not printing jobs from the computer?
Check that both ends of the printer cable are securely connected and try replacing the printer cable or interface cable. If the issue persists, the problem might be with a specific file or application. In that case, verify the printer driver settings for that application or try printing another file.
What does 'Add paper in cassette' mean on my Kyocera Printer?
Supply paper according to the paper source displayed (paper cassettes, MP tray, or optional paper feeders).
Why does my Kyocera Printer have dirt on the top edge or back of the paper?
If the problem is not solved even after printing several pages, clean the registration roller. If the problem is not solved after cleaning, call for service.
Why does my Kyocera ECOSYS FS-2100D Printer have a gray background on printouts?
Refresh the drum to restore the printing quality, and then adjust the print density. If the problem is not solved using the corrective action above, call for service.
What to do if nothing lights up on my Kyocera ECOSYS FS-2100D's operation panel?
First, check that the power cord is properly plugged into the power outlet. If it isn't, plug it in securely and try turning the printer on again. If that doesn't work, pull out the power cord, wait more than a minute, then plug it back in and try again. Also, make sure that you press the power switch.
Why is my Kyocera ECOSYS FS-2100D emitting steam?
The steam emitted from your Kyocera Printer is likely due to the heat generated during printing causing moisture in the paper to evaporate, especially if the room temperature is low or damp paper is used. This is generally not a problem and you can continue printing. However, if it concerns you, try raising the room temperature or using newer, dryer paper.
What to do if my Kyocera Printer prints a status page but not jobs from the computer?
First, ensure both ends of the printer cable are securely connected. If the issue persists, try replacing the printer cable or interface cable. Also, the problem might be with a specific file or application. Try printing a different file or using another print command to check program files and application software. If it only happens with one file, review the printer driver settings for that application.
What to do if my Kyocera ECOSYS FS-2100D Printer displays 'Cannot connect. Multiple access points are enabled'?
Multiple access points were detected with the optional wireless network interface kit. Check the settings of the wireless network interface.
What to do if my Kyocera ECOSYS FS-2100D displays 'Cannot connect'?
Check the settings of the wireless network interface. This issue occurs when the printer cannot connect to the network with the optional wireless network interface kit.
How to fix faint or blurred printing on my Kyocera ECOSYS FS-2100D?
First, check the EcoPrint settings and turn it off on the operation panel if it is on. Ensure the paper type setting matches the paper you are using. You may also refresh the drum to restore printing quality and adjust the print density. If you're using damp paper, replace it with a newer, dryer paper. If the problem persists after these steps, call for service.
To Next Page
General