27
4 Push the center as shown in the figure to make space for
the developer unit.
5 Put the developer unit into that space.
To reinstall the developer unit into the printer, use the reverse procedure of the above.
ENERGY STAR
®
As an ENERGY STAR Partner, we have determined that this product meets the
E
NERGY STAR guidelines for energy efficiency.
The basic objective of the E
NERGY STAR Program is to reduce environmental pol-
lution by encouraging the manufacture and sale of equipment that uses energy
more efficiently.
This printer is equipped with a sleep timer function that conforms with the stan-
dards of the E
NERGY STAR Program. This function makes it possible to reduce
the amount of electrical power consumed by the printer. For maximum power
savings, turn off the printer’s power supply when not using the printer for
extended periods of time.
For details on the sleep timer function and printer power consumption, refer to
the CD-ROM instruction manual provided with the printer.
Initial settings of the sleep timer function and power saved using the sleep timer
function:
( ): E
NERGY STAR program guideline
Group for Energy Efficient Appliances (GEEA)
The goal of GEEA is efficient use of energy. This product has a high-efficiency
profile and meets the criteria for receiving the GEEA-Label.
Model name Initial sleep mode setting
Power consumption in sleep
mode
FS-3820N 15 minutes (30 minutes) 13 W (30 W)
FS-3830N 15 minutes (60 minutes) 13 W (40 W)
Model name Initial sleep mode setting
Power consumption
Power off Sleep mode
FS-3820N 15 minutes (30 minutes) 0 W (1 W) 13 W (15 W)
FS-3830N 15 minutes (60 minutes)
( ): GEEA criteria
Developer Unit
FS3830NIG1.fm 27 ページ ２００３年１２月１２日 金曜日 午後５時１５分
To Next Page
Loading...
Need help?
General