Kyocera ECOSYS FS-3920DN Printer operation panel is off, what to do?
If nothing lights up on the operation panel of your Kyocera Printer, and the fan isn't running when you turn it on, ensure the power cord is properly plugged into the power outlet at both ends. Try replacing the power cord. Also, check that the power switch is in the On ( | ) position.
How to resolve gray background issue on my Kyocera ECOSYS FS-3920DN?
If your Kyocera printer displays 'Gray background' and the [Attention] indicator is flashing, it means the toner is low. Install a new toner kit. Also, adjust the print density by accessing the print menu from the operation panel and selecting a lighter density setting.
How to remove dirt on paper from Kyocera ECOSYS FS-3920DN Printer?
To correct this, clean the parts in the paper paths, such as the paper cassette, etc.
Why is my Kyocera Printer emitting vapor from the rear?
If your Kyocera printer is emitting vapor from the rear, it may be due to low temperature near the printer or humidity in the paper. Heat generated during printing can evaporate moisture, causing the vapor. This is not a problem and printing can continue. To reduce the vapor, increase the room temperature and use paper stored in a dry place.
Why does my Kyocera Printer say 'Enter Account'?
If your Kyocera printer displays 'Enter Account', it indicates that an account code must be entered. This message appears if you attempt to print from the operation panel (e.g., printing a status page or using the Job Retention function) when the Job Accounting function is enabled.
Why is Kyocera Software not discovering the printing system?
The printing system might be turned off, so turn it on and try again. It could also be removed from the network, so ensure it's connected. If the system is currently printing, wait until it's finished and then try searching again. It is also possible that the TCP/IP settings on your PC are not configured properly, in that case contact your network administrator. Depending on the network router configuration, a printing system may be undetectable. In some rare cases, heavy network traffic may prevent this application from detecting the printing systems, so try again later or contact your network administrator.
How to fix gray background on Kyocera Printer?
If your Kyocera Printer is showing a gray background on prints, check the operation panel for the Toner low message and a flashing [Attention] indicator; if present, install a new toner kit. You can also adjust the print density by accessing the print menu on the operation panel and selecting a lighter setting.
Why is my Kyocera ECOSYS FS-3920DN Printer printing completely blank pages?
If you are getting completely blank printouts from your Kyocera printer, check the toner container. Open the top cover and make sure the toner container is correctly installed in the printer. Also, verify that the application software is operating correctly.
Why won't my Kyocera Printer turn on?
If nothing lights up on the operation panel of your Kyocera printer, and the fan makes no noise, make sure the power cord is properly plugged into the power outlet. Connect both ends of the power cord securely and try replacing the power cord. Also, check that the power switch is in the On (|) position.
How to fix black or white vertical streaks on Kyocera ECOSYS FS-3920DN Printer?
If your Kyocera Printer is producing black or white vertical streaks, check the operation panel for a Toner low message. If displayed, install a new toner kit.
General| Print Technology | Laser |
|---|---|
| Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Print Speed | 40 ppm |
| Memory | 128 MB, expandable to 640 MB |
| Dimensions | 390 x 285 mm |
| Weight | 14.1 kg |
Explains the layout and functions of the printer's operation panel.
Offers guidelines for choosing appropriate paper for optimal printing.
Lists and describes the various paper types the printer can use.
Step-by-step instructions for loading paper into the printer's cassette.
Guide to configuring network settings like TCP/IP and IPv6.
Detailed steps for installing printer drivers on Windows and Mac OS.
Guidance on how to replace the toner container and its frequency.
Instructions for replacing the waste toner box, usually with toner replacement.
Identifies print quality issues and provides corrective actions.
Lists and explains common error messages and their solutions.
Step-by-step guide to identifying and clearing paper jams from various locations.
Guides users on navigating and using the printer's menu system.
Details how to configure network settings, including TCP/IP and IPv6.
Explains how to set up administrator IDs, passwords, and interface blocking.
Covers setting and changing administrator IDs and passwords for printer management.
To Next Page
