Name: Kyocera ECOSYS FS-C8520MFP
Brand: Kyocera
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 6

Permanent Parameters

The printing system maintains a number of parameters in a non-volatile (flash) memory.

These parameters control the initial state of the environment at power-up, including the

initial emulation mode, page orientation, character set, buffer allocations in memory,

interface parameters, and other options.

The parameters may be changed permanently with the FRPO (Firmware RePrOgram)

command. Some FRPO parameters affect only the current interface (interface-depen-

dent) and some affect all interfaces at once (non-interface-dependent). If the printing sys-

tem is shared with other users, remember that any changes to any non-interface-

dependent parameters may interfere with the print jobs of the other users. This chapter

explains the FRPO command and gives examples of its use.

The current settings of the FRPO parameters are listed as option values on the printing

system’s service status page. Refer to the tables in this chapter to interpret the values. To

print a service status page, command:

!R! STAT 1; EXIT;

Before changing any FRPO parameter, print out a service status page, so you will know

the parameter values before the changes are made. To return FRPO parameters to their

factory default values, send the FRPO INIT (FRPO-INITialize) command.

Other manuals for Kyocera ECOSYS FS-C8520MFP

Questions and Answers:

Need help?

Do you have a question about the Kyocera ECOSYS FS-C8520MFP and is the answer not in the manual?

General