EasyManuals Logo

Kyocera ECOSYS FS-C8520MFP Technical Reference Manual

Kyocera ECOSYS FS-C8520MFP
260 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
Chapter 7
Emulation
The printing systems emulate the operation of seven other printers:
HP LaserJet (mode 6)
HP 7550A (mode 8)
IBM Proprinter X24E (mode 1)
Epson LQ-850 (mode 5)
Diablo 630 (mode 2)
Standard line printer (mode 0)
KPDL (mode 9) [PostScript compatible]
Word-processing and graphics software for any of the above printers also works with the
printing system. All you need to do is to set the printing system to emulate the printer
your software supports and select the appropriate printer driver.
In rare cases when your software does not support any of the printers above, install your
software to drive the standard line printer and use PRESCRIBE commands to control
line spacing, character spacing, etc.
Inappropriate selection of printer drivers and printer-based emulations will produce
undesirable results.
When shipped from the factory, the printing system is set to emulate the HP LaserJet. For
best results, look for an appropriate printer driver in your software application.
You can also find the appropriate printer driver for your model in the CD-ROM supplied
with the product. Or, you are encouraged to visit our Internet home page to directly
download the printer driver of the latest version.
This chapter first explains how to select an emulation. Then it gives some general infor-
mation applying to all the emulation modes. Finally, it goes over each of the modes,
explaining the printing system’s word-processing capabilities and showing its character
sets. Tables of control codes and escape sequences are also given at the end of each emu-
lation section.

Table of Contents

Other manuals for Kyocera ECOSYS FS-C8520MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS FS-C8520MFP and is the answer not in the manual?

Kyocera ECOSYS FS-C8520MFP Specifications

General IconGeneral
CategoryPrinter
TypeMultifunction Printer
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print Speed (B/W)20 ppm
Print Speed (Color)20 ppm
Max Print Speed (B/W)20 ppm
Max Print Speed (Color)20 ppm
Print Resolution600 x 600 dpi
Max Print Resolution9600 x 600 dpi
Max Paper SizeA3
Duplex PrintingYes
Scanner TypeFlatbed, ADF
Scan Resolution600 x 600 dpi
Duplex ScanningYes
Copy Resolution600 x 600 dpi
FaxYes
Supported Paper SizesA3, A4, A5, A6, B5, Letter, Legal
Monthly Duty Cycle65000 pages
Max Paper Capacity1600 sheets
Memory1 GB
ConnectivityUSB, Ethernet
Copier Speed (B/W)20 ppm
Copier Speed (Color)20 ppm
Copy Speed (B/W)20 ppm
Copy Speed (Color)20 ppm
Display4.3-inch touch screen

Related product manuals