3-25
Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be registered.
1
Select the One Touch Key to be registered.
1 In the Send or FAX screen, press the One Touch Key that you want to register and hold it
(2 seconds or more).
2 [ā²] [ļ±] key > key number > [OK] key
Select a One Touch Key number with no registered destination.
2
Select the destinations.
Select the destination to be registered to the One touch key from the destinations registered in
the addresses and select the [OK] key.
The destination will be added to the One Touch Key.
ā¢ Numbers 1 to 11 are the One Touch Key numbers while the [Shift Lock] indicator is switched off. Numbers 12 to 22
are the One Touch Key numbers while the [Shift Lock] indicator is switched on by selecting the [Shift Lock] key.
ā¢ Refer to the following for use of One Touch Key.
Checking and Editing Destinations (page 5-33)
ā¢ You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-55)
Select [Menu] and select [Search(Name)] to search using a name.
To Next Page
Loading...
Need help?
General
