9-20
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
ID Card Settings
If ID card authentication is enabled, select the authentication type.
1
Display the screen.
1 [System Menu/Counter] key > [ā²] [ā¼] key > [User/Job Account] > [OK] key
2 [ā²] [ā¼] key > [User Login Set.] > [OK] key
2
Configure the settings.
[ā²] [ā¼] key > [ID Card Settings] > [OK] key
The following settings can be selected.
This functions appears when the Card Authentication Kit is activated.
Optional Applications (page 11-6)
If the login user name entry screen appears during operations, enter a login user name
and password, and select [
Login
]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Item Descriptions
Key Login When ID card authentication is enabled, select whether or not login by
keyboard is allowed.
Value: Permit, Prohibit
Additional Auth.
*1
*1 This function does not appear when the server type is set to [NTLM] or [Kerberos] in "Network
Authentication".
Select whether or not to require password entry after authenticating by ID
card.
Value: Off, Use Password, Use PIN Code
*2
*2 This function appear when [Network Authentication] is selected for the authentication method and
the server type is set to [Ext.] in "Network Authentication".
Model Name Login User Name Login Password
ECOSYS M2135dn/ECOSYS
M2635dn/ECOSYS M2635dw
3500 3500
ECOSYS M2040dn/ECOSYS
M2540dn/ECOSYS M2540dw
4000 4000
To Next Page
Loading...
Need help?
General
