8-3
Setup and Registration (System Menu) > System Menu
Refer to System Menu Settings on the following page and configure as needed.
• In order to change settings that require administer privileges, you must log in with
administrator privileges.
The factory default login user name and login password are set as shown below.
• If function default settings have been changed, the [Reset] key can be pressed in each
function screen to immediately change the settings.
Model Name Login User Name Login Password
ECOSYS M3040idn/
ECOSYS M3540idn
4000 4000
ECOSYS M3550idn 5000 5000
ECOSYS M3560idn 6000 6000
To Next Page
Loading...
