Kyocera ECOSYS M3540idn

2-9
Installing and Setting up the Machine > Login/Logout
Login/Logout
If you are setting a function that requires administrator rights, or if user login administration is enabled, you must enter
your login user name and login password.
Login
Normal login
1
Enter the login user name and login password to login.
1 If this screen is displayed during operations, press [Keyboard] to enter the login user name.
2 Press [Password] to enter the login password and press [OK].
2
Press [Login].
NOTE
The factory default login user name and login password are set as shown below.
You will be unable to login if you forget your login user name or login password. In this event, login with administrator
privileges and change your login user name or login password.
Character Entry Method (page 11-12)
NOTE
If [Network Authentication] is selected as the user authentication method, either [Local] or
[Network] can be selected as the authentication destination.
Model Name Login User Name Login Password
ECOSYS M3040idn/ECOSYS M3540idn 4000 4000
ECOSYS M3550idn 5000 5000
ECOSYS M3560idn 6000 6000
10:10
Keyboard
Login Password
Keyboard
Login User Name
Login
Enter login user name and password.
Login to:: Local