9-22
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
3 Press [User Login Setting], [ ], [Group Authorization], [Group List] and then [].
2
Configure the settings.
1 Enter the group ID and press [Next].
2 Enter the group name and press [Next].
3 Select the group access privileges and press [Next].
4 Check the settings and change or add information as needed.
3
Register the group.
Press [Save]. A new group is added on the group list.
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Refer to Character Entry Method on page 11-12 for details on entering characters.
Model Name Login User Name Login Password
ECOSYS M3040idn/
ECOSYS M3540idn
4000 4000
ECOSYS M3550idn 5000 5000
ECOSYS M3560idn 6000 6000
Group Authorization Set. - Group List
10:10System Menu/Counter.
Others
Menu
1/1
End
Add - Group ID
10:10
(1 - 4294967295)
Cancel Next >
Enter the group ID.
To Next Page
Loading...
