Kyocera ECOSYS M3860idn - Page 107

2-53
Installing and Setting up the Machine > Installing Software
2
Configure TWAIN Driver.
3
Finish registering.
NOTE
When the machine's IP address or host name is unknown, contact Administrator.
NOTE
Click [Delete] to delete the added machine. Click [Edit] to change names.
3
2
1
5
4
(Network)
1 Enter the machine name.
2 Select this machine from the list.
3 Enter the machine's IP address or host name.
4 Set units of measurement.
5 When using SSL, select the checkbox beside SSL.
6 Click [OK].
(USB)
2
1
3
4
1 Enter the machine name.
2 Select this machine from the list.
3 Set units of measurement.
4 Set the Compression Level.
5 Click [OK].
6
5