Kyocera ECOSYS M3860idn - Using the Manual Stapler (ECOSYS M3860 Idn Only)

5-55
Operation on the Machine > Using the Manual Stapler (ECOSYS M3860idn only)
Using the Manual Stapler
(ECOSYS M3860idn only)
You can staple copied paper manually without any print operation.
Maximum number of sheets available for manual stapling
1
Straighten the edges of the stack of paper, and with the front
side facing up, insert the paper into the manual stapler.
When the paper is inserted all the way in, stapling takes place.
NOTE
If the machine is out of staples, add more staples.
Replacing Staples (page 10-12)
Paper weight Number of stapled sheets
80 g/m
2
20 sheets maximum
*1
*1 Paper stack up to 2 mm thick.
90 g/m
2
or less 15 sheets maximum
*1
NOTE
Manual stapling cannot be used while the machine is in sleep mode.
To use manual stapling, select the [Energy Saver] key.