3NY
1-3-7
2630 PF feed motor 4 error
(paper feeder 4)
When the PF feed motor is driven,
error signal is detected continuously
for 2 s.
Defective con-
nector cable or
poor contact in
the connector.
Reinsert the connector. Also check for
continuity within the connector cable.
If none, replace the cable.
PF feed motor 4 and PF main PWB
(YC6)
Defective drive
transmission sys-
tem of the PF
feed motor.
Check if the rollers and gears rotate
smoothly. If not, grease the bushes and
gears. Check for broken gears and
replace if any.
Defective PF
feed motor.
Replace the PF feed motor 4.
Defective PF
main PWB.
Replace the PF main PWB.
(See page 1-4-4)
Code Contents Causes
Check procedures/
corrective measures
To Next Page
Loading...
