6-9
Setup and Registration (System Menu) > System Menu
Print Quality Set the Print Quality.
Gloss Mode Gloss Mode increases the effect of glossiness in printing. However, printing takes longer time.
Values: Off, On
IMPORTANT
Gloss mode is not available when [LABELS] and [TRANSPARENCY] is selected as the
paper type setting.
Cassette1 (2) Type (page 6-6)
MP Tray Type (page 6-6)
Depending on the paper used, printing in gloss mode may cause curl in paper.
To reduce curl, try using thicker paper.
EcoPrint Mode EcoPrint conserves toner when printing. This is recommended for test copies where faded
printing is not a problem.
Values: Off, On
Resolution Set the resolution used for printing.
Value: 1200 dpi, 600 dpi
NOTE
Settings that are received from the printer driver have priority over the operation panel settings.
Page Setting You can set print preferences such as the number of pages and print orientation.
Copies Set the default number of copies, from 1 to 999.
Value: 1 to 999 copies
Orientation You can select portrait (upright) or landscape (sideways) page orientation.
Value: Portrait, Landscape
Wide A4 Turn this to on to increase the maximum number of characters that can be printed in a line for
an A4 page (78 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). This
setting is only effective in PCL 6 emulation.
Value: Off, On
XPS FitTo Page Set the default value for the XPS fit to page function.
Value: Off, On
TIFF/JPEG Size Select the image size (resolution) when printing JPEG or TIFF file.
Value: Paper Size, Image Resolution, Print Resolution
User Name Set whether the user name set in the printer driver is displayed.
Value: Off, On
Job Name Set whether the job name set in the printer driver is displayed.
Value: Off, Job Name, Job No.+Job Name, Job Name+Job No.
Job Terminator You can select the condition which regarded as a job termination if the print job could not be
processed until the end due to your environment and the other reason.
Value:
EOJ: The command recognized as a termination of the job data is regarded as one job until it is
detected.
End of Session: The data included in a network session at network connection is regarded as
one job.
UEL: The UEL included in the termination of the job data is regarded as one job until it is
detected.
Item Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
