Kyocera FS-1020MFP - Page 50

2-34
Preparation
Quick Scan/TWAIN Settings
Settings required for scanning on the machine are explained below. The settings specified here will be the default settings
for scanning.
1 Start KYOCERA Client Tool as explained in Accessing KYOCERA Client Tool on
page 2-22.
2 Click Preferences or Quick Scan Settings on the Scan tab.
TWAIN Settings
Item Description
Preferences Change the TWAIN scan settings. This setting is effective for Quick Scan only.
Quick Scan Settings Change the settings for Scan to PDF, Scan to Email and Scan to Folder.
No. Item Description
1 Original size Specify the size of originals being scanned.
Value: Letter, Statement, Executive, A4, A5, A6, B5 (JIS), B5
(ISO), 16K, Custom
Note Refer to Configuration on page 2-36 for selecting Custom.
2 Scan color Select the color mode setting.
Value: Monochrome, Grayscale, Full color
3 Resolution Select fineness of scanning resolution.
Value: 200 × 200 dpi, 300 × 300 dpi, 400 × 400 dpi,
600 × 600 dpi
4Sharpen Adjust the sharpness of the image.
Value: None, Low, Medium, High, Descreen (Blurs the outlines
and reduces the sharpness.)
1
2
3
8
4
5
6
7
9
10