Kyocera FS-1030D

Options
32 OPERATION GUIDE
CompactFlash (CF) Card
The printer is equipped with a slot for a CompactFlash card with the
maximum size of 256MB. A CompactFlash card is useful for storing fonts,
macros, and overlays. You can use the IC Link for Windows utility to
download fonts, etc., to a CompactFlash card. This software is included in
the CD-ROM supplied with the printer.
IMPORTANT: Before inserting a CompactFlash card in the printer, make
sure that the printer is switched off.
1
Turn off the printer.
2
Remove the option interface slot
cover.
When the Network Interface Card
or the Serial Interface Board is
installed, remove it.
3
Insert the CompactFlash card in
the slot. Insert as shown in the
figure. Push it in all the way.
4
Close and secure the slot cover. If the Network Interface Card or the Serial
Interface Board is removed in the step 2 above, reinstall and secure the
card or the kit.