What to do if pressing Start key on Kyocera Printer does not produce copies?
If pressing the Start key on your Kyocera Printer does not produce copies, check the Message Display for any messages and respond accordingly. Also, check if the machine is in Sleep mode; if so, press any key on the operation panel to recover the machine. It will be ready to copy within 15 seconds.
How to remove moire pattern from Kyocera Printer copies?
If copies from your Kyocera Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Photo].
Why are my Kyocera Printer printouts fuzzy?
If the printouts from your Kyocera Printer are fuzzy, and the machine is being used in very humid conditions, move it to a location with suitable humidity.
How to fix Kyocera Printer cannot feed originals?
If your Kyocera Printer cannot feed originals, when placing originals in the document processor, align the original width guides securely before placing the originals.
How to fix improperly printed documents on Kyocera Printer?
If documents are printed improperly by your Kyocera Printer, check that the printing system driver and application software settings are set properly on your PC.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Duplex Printing | Yes |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Connectivity | USB 2.0, Ethernet |
| Functions | Print, Copy, Scan, Fax |
| Warm-up Time | 20 seconds |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Scan Type | Flatbed, ADF |
| Fax Transmission Speed | 33.6 kbps |
| Modem Speed | 33.6 kbps |
| Standard Input Capacity | 250 sheets |
| Maximum Input Capacity | 800 sheets |
| Standard Output Capacity | 150 sheets |
| Standard Interfaces | USB 2.0, Ethernet |
| Ethernet LAN | Yes |
| Product Colour | White |
| Dimensions | 494 x 430 x 448 mm |
| Print Speed | 35 ppm |
| Copy Speed | 35 cpm |
| Standard Paper Tray Media Types | Plain, Recycled |
| Memory | 512 MB |
To Next Page
