2JN
1-3-26
U073
Checking scanner operation
Description
Simulates the scanner operation under arbitrary conditions.
Purpose
To check scanner operation.
Start
1. Press the start key.
2. Select the item to be operated using the cursor up/down keys.
Setting: SCANNER MOTOR
1. Select [SCANNER MOTOR].
2. Select the item to be set using the cursor up/down keys.
3. Change the setting using the cursor left/right keys.
Original sizes for each setting in SIZE
4. Select [EXECUTE] using the cursor up/down keys.
5. Press the start key. Scanning starts under the selected conditions.
6. To stop operation, press the stop key.
Method: HOME POSITION
1. Select [HOME POSITION].
2. Press the start key.
The mirror frame of the scanner moves to the home position.
Method: DUST CHECK
1. Select [DUST CHECK].
2. Press the start key. The exposure lamp lights.
3. To turn the exposure lamp off, press the stop key.
Method: DP READING
1. Select [DP READING].
2. Press the start key.
The mirror frame of the scanner moves to the reading position.
Completion
Press the stop key when scanning stops. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
SCANNER MOTOR Scanner operation
HOME POSITION Home position operation
DUST CHECK Dust adhesion check operation with lamp on
DP READING DP scanning position operation
Display Operating conditions Setting range
ZOOM Magnification 25 to 400%
SIZE Original size See below.
LAMP On and off of the exposure lamp 0 (off) or 1 (on)
Setting Paper size Setting Paper size
5000 A4 7800 Folio
6100 B5R 8400 8 1/2" x 14"
5000 A5R 6600 8
1/2" x 11"
To Next Page
Loading...
