2JN-1
1-3-37
U252
Setting the destination
Description
Switches the operations and screens of the machine according to the destination.
Purpose
To be executed after initializing the backup RAM, in order to return the setting to the value before replacement
or initialization.
Setting
1. Press the start key.
2. Select the destination using the cursor up/down keys.
3. Press the start key. The setting is set.
4. After turning the main power switch off, wait a while and turn it on.
(If fax is not detected, try turning the main power switch on and off again.)
Supplement
The specified initial settings are provided according to the destinations in the maintenance items below. To
change the initial settings in those items, be sure to run maintenance item U021 after changing the destina-
tion.
Initial setting according to the destinations
U253
Switching between double and single counts
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider), if folio size paper is to be
counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the count system using the cursor up/down keys.
Initial setting: DBL COUNT(FOLIO)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
INCH Inch (North America) specifications
EUROPE METRIC Metric (Europe) specifications
ASIA PACIFIC Metric (Asia Pacific) specifications
AUSTRALIA Australia specifications
CHINA China specifications
Maintenance
item No.
Title Japan Inch Europe Metric,
Asia Pacific
253 Switching between double and single
counts
Single Double Double
Display Description
SGL COUNT(ALL) Single count for all size paper
DBL COUNT(FOLIO) Double count for Folio size or larger
To Next Page
Loading...
