2JN-2
1-3-64
U660
(cont.)
Setting for a PBX
Selects the mode to connect an outside call when connected to a PBX.
According to the type of the PBX connected, select the mode to connect an outside call.
1. Select the setting using the cursor up/down keys.
Initial setting: LOOP
2. Press the start key. The setting is set.
Setting the loop current detection before dialing
Sets if the loop current detection is performed before dialing.
1. Select the setting using the cursor up/down keys.
Initial setting: ON
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U670
Outputting lists
Description
Outputs a list of data regarding fax transmissions.
Printing a list is disabled either when a job is remaining in the buffer or when [Pause All Print Jobs] is pressed
to halt printing.
Purpose
To check conditions of use, settings and transmission procedures of the fax.
Method
1. Press the start key.
2. Select the item to be output using the cursor up/down keys.
3. Press the start key. The selected list is output.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
EARTH Earth mode
FLASH Flashing mode
LOOP Code number mode
Display Description
ON Performs loop current detection before dialing.
OFF Does not perform loop current detection before dialing.
Display Description
SETTING LIST Outputs a list of software switches, self telephone number, confiden-
tial boxes, ROM versions and other information.
ACTION LIST Outputs a list of error history, transmission line details and other infor-
mation.
SELF ST REPORT Outputs a list of settings in maintenance mode (own-status report)
regarding fax transmission only.
PROTOCOL LIST Outputs a list of transmission procedures.
ERROR LIST Outputs a list of error.
ADDR BOOK(No.) Outputs address book in order IDs were added
ADDR BOOK(Name) Outputs address book in order of names
ONE-TOUCH LIST Outputs a list of one-touch.
GROUP LIST Outputs a list of group.
To Next Page
Loading...
