Kyocera FS-1130MFP

2MH/2MJ/2MK/2ML
1-4-24
(4)Power source
fan motor does not
operate.
1. Broken power source
fan motor coil.
Check for continuity across the coil. If none, replace the
power source fan motor.
2. Defective harness
between power
source fan motor and
control PWB
(YC107), or improper
connector insertion.
Reinsert the connector. Also check for continuity within the
connector harness. If none, remedy or replace the harness.
3. Defective control
PWB.
Replace the control PWB (See page 1-5-37).
(5)Registration
clutch does not
operate.
1. Broken registration
clutch coil.
Check for continuity across the coil. If none, replace the
registration clutch.
2. Defective harness
between registration
clutch and control
PWB (YC20), or
improper connector
insertion.
Reinsert the connector. Also check for continuity within the
connector harness. If none, remedy or replace the harness.
3. Defective control
PWB.
Replace the control PWB (See page 1-5-37).
(6)Paper feed
clutch does not
operate.
1. Broken paper feed
clutch coil.
Check for continuity across the coil. If none, replace the
paper feed clutch.
2. Defective harness
between paper feed
clutch and control
PWB (YC20), or
improper connector
insertion.
Reinsert the connector. Also check for continuity within the
connector harness. If none, remedy or replace the harness.
3. Defective control
PWB.
Replace the control PWB (See page 1-5-37).
(7)Developer
clutch does not
operate.
1. Broken developer
clutch coil.
Check for continuity across the coil. If none, replace the
developer clutch.
2. Defective harness
between developer
clutch and control
PWB (YC20), or
improper connector
insertion.
Reinsert the connector. Also check for continuity within the
connector harness. If none, remedy or replace the harness.
3. Defective control
PWB.
Replace the control PWB (See page 1-5-37).
Problem Causes Check procedures/corrective measures