2MH/2MJ/2MK/2ML
1-4-26
(12)A paper jam in
the paper feed/
conveying section
or fuser section is
indicated when the
main power switch
is turned on.
1. A piece of paper torn
from paper is caught
around registration
sensor or exit sen-
sor.
Check and remove if any.
2. Defective registration
sensor on the high
voltage PWB.
Replace the high voltage PWB (See page 1-5-43).
3. Defective exit sen-
sor.
Replace the exit sensor.
(13)Attention indi-
cator is lit when the
front cover is
closed.
1. Defective interlock
switch on the power
source PWB.
Check for continuity across the interlock switch. If there is
no continuity when the interlock switch is on, replace the
power source PWB (See page 1-5-40).
(14)When the trou-
ble occurs in the
DP.
Refer to the DP’s service manual.
Problem Causes Check procedures/corrective measures
To Next Page
Loading...
