6-8
Maintenance
Prolonged Non-Use and Moving of the Machine
Prolonged Non-use
If you ever leave the machine unused for a long period of time, remove the power cord from the wall outlet.
We recommend you consult with your dealer about the additional actions you should take to avoid possible damage that
may occur when the machine is used next time.
Moving the Machine
When you move the machine:
• Move it gently.
• Keep it as level as possible to avoid spilling toner inside the machine.
• Be sure to consult a service representative before attempting long distance transportation of the machine.
• Keep the machine horizontal.
Adjust scan
position
Scanning start
position
Adjust the position of the scanned
image.
Scan margins Adjust the width of the top edge,
bottom edge, left edge and right edge
margins.
Restore factory default Restore factory default settings.
WARNING If you are shipping the machine, remove and pack the developer unit and drum unit in a plastic
bag and ship them separately from the machine.
Maintenance Menu Description
To Next Page
Loading...
