Kyocera FS-1350DN Service Manual

2H4
1-3-8
Toner install mode
Description
The new developing unit is shipped from the factory with no toner contained. The develop-
ing unit can be automatically replete with toner when a toner container is installed onto it
and the printer is turned on. However, because the toner reservoir in the developing unit
has a large capacity, it requires a lengthy period of time until a substantial amount of toner
has been fed to get the printer ready. (A new developing unit needs approximately 260 g
for triggering the sensor inside.)
Purpose
To execute when the developing unit has been replaced.
Method
1. Enter the maintenance mode [>>Developer].
2. Press the OK key. [>>Developer?] will be displayed.
3. Press the OK key. [Ready] will be displayed.
4. Turn off and on the printer. [Self test] [Please wait (Adding toner)] will displayed.
The printer continually engages in this mode for a period of approximately 15
minutes, after which the printer reverts to the [Ready] state. [Ready] will dis-
played. Developing unit initialization is finished.
Completion
Maintenance items Description
>>Developer

Kyocera FS-1350DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Processor model	PowerPC–440F5
Maximum internal memory	1152 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	54 dB
Power supply type	AC 220 - 240 V, 50/60 Hz
Capacity cartridge	7200 sheets
Standard media sizes	(105 x 148 - 216 x 297 mm)
Power consumption (active)	484 W
Compliance industry standards	TUV/GS, CE
Number of print cartridges	1
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum print size	216 x 356 mm
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power consumption (standby)	12 W
Power consumption (PowerSave)	7.1 W
Display	LCD

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 267 mm