Kyocera FS-1350DN Service Manual

2H4
1-6-6
13. Turn printer power on.
14. When message display (1) is displayed to
detect firmware in the memory card.
15. Message display (2) is displayed during
downloading.
16. When message display (3) is displayed to
indicate downloading is finished.
Figure 1-6-10
17. Turn printer power off.
18. Remove the memory card from memory
card slot.
19. Refit the optional interface slot cover.
20. Turn printer power on.
21. Print the status page to check that the firm-
ware version has been updated.
(See page P.1-3-7)
Figure 1-6-11
(2)
(1)
supervisor mode
CF-card reading
supervisor mode
(3)
2H4_1000.000.024
[E1F9]
Message display
Supplement (Normally: 00)
Classification (Normally: 0)
Product code
2H4= This printer
Checksum
Update history
Build number
Firmware category
10: Engine
30: System (Main)
31: System (BROM)
Option interface
slot cover
Screw
Screw
Memory card slot
Memory card

Kyocera FS-1350DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	6 s
Print speed (black, normal quality, A4/US Letter)	30 ppm
Processor model	PowerPC–440F5
Maximum internal memory	1152 MB
Sound power level (standby)	30 dB
Sound pressure level (printing)	54 dB
Power supply type	AC 220 - 240 V, 50/60 Hz
Capacity cartridge	7200 sheets
Standard media sizes	(105 x 148 - 216 x 297 mm)
Power consumption (active)	484 W
Compliance industry standards	TUV/GS, CE
Number of print cartridges	1
Total input capacity	250 sheets
Maximum input capacity	800 sheets
Maximum print size	216 x 356 mm
Non-ISO print media sizes	Folio (media size), Letter (media size)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Power consumption (standby)	12 W
Power consumption (PowerSave)	7.1 W
Display	LCD

Weight and Dimensions

Dimensions (WxDxH)	375 x 393 x 267 mm