11
English
Operating the Optional Bulk Paper Feeder
This chapter describes how to load paper in the feeder and to select the feeder as
the paper source.
CAUTION When the tray is rising or descending, please observe the
following precautions.
F Keep your fingers out of the slot on the inner side of the
feeder.
F While the tray is descending, keep your hands out from
under the tray.
F Do not push down on the tray or pull it upward.
Loading Paper
Once the feeder has been installed in accordance with the instructions provided
previously; you can prepare to load paper. Before loading paper, you must adjust
the side plates inside the feeder to the actual width of the paper to be loaded.
Note The legal-size paper is not usable with the bulk paper feeder.
For details on paper size, see Paper Specifications later in this
manual.
1. Turn printer power on. The paper feeder is turned on simultaneously.
2. Gently open the feeders tray cover. The paper tray will lower.
To Next Page
Loading...
