14
Loading Paper in the Printers Cassette
To gain access to the printers paper cassette for loading paper, etc., slide the bulk
paper feeder fully backward from the printer. If you are using a Legal-size
cassette in the printer, you will need to remove the bulk paper feeder from the
mounting base (rail).
Selecting Paper Feed from the Optional Paper Feeder
You can select paper feed from the optional bulk paper feeder using the FEED
key on the printers control panel. You can also select it by including
PRESCRlBEs CASS command in a file that you send to the printer from the
computer. Note that the optional bulk paper feeder replaces the printers multi-
purpose tray.
Selection from the Printers Control Panel
1. First, verify that the printers message display shows either Ready or
Add paper.
2. Next, press the FEED key to change the source of paper feed. The
source indication toggles between the following sequences:
Cassette
Bulk feeder
To select the paper feeder as the paper source, select Bulk feeder.
Notes F When printing on special forms such as envelopes, labels,
or thick paper, use the printers STACK key to select
paper output to the face up tray.
F If paper is not loaded into the feeder, or the feeder is
detached from the printer (on the rail which, when
pulled, detaches the feeder from the printer), the printer
shows Add paper.
3. Make sure that the printer is ready and on-line, then begin printing.
Note When used with the bulk paper feeder, the printer may print
in the position which does not fully corresponds to the one
the application software requests.
To Next Page
Loading...
