13
English
6. Load up to 2,000 sheets of paper (four standard reams of packages of
paper with a thickness of 0.1 mm) onto the tray. Fan and flex each ream
as you load it. Load the paper with the side on which printing is done
facing upward in the feeder.
Note Dont put in more paper than the limit indicated on the
inside of the feeder. See figure below.
7. Close the cover. The tray will rise and a sheet will feed partially into the
printer. The printer indicates Ready and the feeder is ready for
operation.
Loading Envelopes and Postcards
If you are loading postcards
in the paper feeder, load
them so that they are fed
with the top edge first. For
envelopes, make sure that
they are fed with the right or
bottom edge first.
Adjuster Knob
Load Limit
Direction
of paper
feed
Postcard
Envelope
To Next Page
Loading...
