To Next PageTo Next PageWhat to do if Kyocera Printer prints status page but not computer jobs?
First, ensure both ends of the printer cable are securely connected. If the issue persists, try replacing the printer cable or the interface cable. Also, test printing with another file or print command. If the problem is specific to a file or application, examine the printer driver settings for that application.
How to fix Kyocera Printer when nothing lights up?
If nothing lights up on the operation panel of your Kyocera printer, and the fan makes no noise, start by checking that the power cord is properly plugged into the power outlet. If it is, securely plug it in and try turning the printer on again. If the problem persists, unplug the power cord, wait for more than a minute, then plug it back in and try again. Also, ensure that the power switch is pressed.
Why is my Kyocera Printer printing faint or blurred?
If your Kyocera printer is producing faint or blurred prints, first check the EcoPrint settings on the operation panel and ensure it is switched off. Also, verify that the paper type setting matches the paper you are using. If the issue continues, replacing the paper with a newer, dryer paper may help.
What to do if Kyocera Printer shows 'Check cassette #'?
If your Kyocera printer displays the message 'Check cassette #,' it indicates a paper lift error in the specified paper source's cassette. To resolve this, pull out the indicated cassette (either the paper cassettes or optional paper feeders) and ensure the paper is loaded correctly.
What does 'Check waste toner box' mean on Kyocera Printer?
The 'Check waste toner box' message on your Kyocera printer indicates one of two things: either a new waste toner box needs to be installed, or the current waste toner box is full.
What to do if Kyocera Printer says 'Developer unit is not installed'?
If your Kyocera printer displays the message 'Developer unit is not installed,' it means the developer unit is either not installed or incorrectly inserted. Ensure the developer unit is securely inserted. If the problem persists, contact your Service Representative.
What to do if Kyocera Printer shows 'Drum unit is not installed'?
If your Kyocera printer shows the message 'Drum unit is not installed,' the drum unit is either missing or not correctly inserted. Make sure the drum unit is securely inserted. If the issue continues, contact your Service Representative.
Why is my Kyocera Printer emitting steam?
The steam emitted from your Kyocera printer is likely due to the evaporation of moisture from the paper during printing, especially in low room temperatures or when using damp paper. This is generally not a problem, and you can continue printing. If the steam is a concern, try raising the room temperature or using newer, dryer paper.
How to fix 'Close left cover' message on Kyocera Printer?
The message 'Close left cover' on your Kyocera printer simply means that the left cover of the printer is open. Ensure that you close the left cover.
What does 'Account error' mean on Kyocera Printer?
The 'Account error' message on your Kyocera printer appears when the Job Accounting function is enabled and an attempt to specify job accounting settings or to register or delete an account fails. Press [OK] to return the printer to a print-ready status.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Standard Paper Capacity | 250 sheets |
| Duplex Printing | Yes |
| Connectivity | USB 2.0, Ethernet |
| Operating System Compatibility | Windows, Mac, Linux |
| Warm-up Time | 15 seconds |
| First Page Out Time | 8.5 seconds |
| Input Capacity | 250 sheets |
| Functions | Print, Copy, Scan |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Maximum Paper Size | Legal |
| Memory | 256 MB |
| Weight | 14 kg |
