photocopied. A security watermark can be used to help protect against unauthorized
reproduction of documents, or simply to differentiate original documents from
photocopies.
Separation Finishing feature that stacks print jobs in an output tray so that one
print job or copy is clearly distinguished from another.
SNMP Simple Network Management Protocol. The standard TCP/IP protocol for
managing IP network devices, including printing devices. SNMP settings determine
the level of security when using the Auto Configure feature, and prevent unauthorized
printing to the SNMPv3 printing device. SNMP settings must be set in the
Administrator settings in Device Settings, and in the printing system’s Command
Center RX.
SSD (Solid-State Drive) Storage device that uses solid-state memory to store
print jobs, as opposed to a mechanically rotating disk. It retains data even if the
printing system is turned off.
Status monitor Optional feature that displays printing system status messages in
the lower right corner of the window during printing. You can customize the
appearance of the status monitor, and determine what messages are displayed and
how by selecting preferences and notifications.
T
Transparency A clear plastic, page-sized sheet used as a printing medium.
Transparency interleaving Publishing feature that inserts a backing sheet
between printed transparencies. The backing sheet, also known as an interleaf, helps
keep transparencies clean and prevents them from clinging together.
W
Watermark The Watermark feature is available in the Advanced tab. A watermark
is a recognizable image or pattern that can be placed on a page or throughout a
document. You can choose one of the standard watermarks or create your own text.
Printer Driver v
To Next Page
Loading...
Need help?
General
