Kyocera FS-2100DN Management Guide

4-16. Management/E-mail > SNMP > Trap
If you are using the SNMP protocol and an error such as paper out occurs, the IB-51 generates a trap and sends it to the trap
recipients. You can setup two trap recipients. The setting details are the same for both recipients.
4-17. Management/E-mail > LDAP
The IB-51 can refer to the LDAP server.
Write Community This setting functions similarly to the read community setting except that it is used for SNMP
requests to write values.
sysContact
This is the MIB-II sysContact object, which typically contains the email address of the network
administrator.
sysName
This is the MIB-II sysName object, which typically contains the host name or domain name of the
IB-51.
sysLocation
This is the MIB-II sysLocation object, which typically contains information about the location of the
IB-51.
HP Web Jetadmin
Compatibility
Enables (YES) or disables (NO) compatibility with HP Web Jetadmin.
Item Description
Authentication Traps
Enables (On) or disables (Off) the MIB-II EnableAuthenTrap object. If this setting is enabled (On),
an SNMP trap is generated if an attempt is made to read or write using an invalid community
string. The trap is sent to the contained trap address.
Trap Community The SNMP trap community string used when the IB-51 generates a trap.
Trap IP Address (IPv4/IPv6) The IP address that receives traps.
Trap IPX Address The IPX address that receives traps.
Selected Errors
Select the events that generate traps from Low Toner, Add Toner, Paper Jam, Add Paper,
Cover Open, and All Other Errors.
Item Description
LDAP Settings
LDAP Enable (on) or disable (off) the LDAP server.
Shared Address Book LDAP Encryption Selects the type of encryption according to the type of security
employed by the LDAP server. Select Off when encryption is not
used.
— LDAPv3/TLS
— LDAP over SSL
— Off
— To activate the configuration, the Encryption needs
to be set to ON.
LDAP Server Name Specifies a name or IP address for the LDAP server.
LDAP Port Number Specifies a port number for LDAP or use the LDAP default port
389.
Search Timeout Specifies a period of time for searching the LDAP server.
Login User Name Specifies the user name.
Login Password Specifies the password.
Page 1
6
of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s